SOP - BLOPS - Nutanix - Setting up a 3 node Nutanix Community Cluster

Articles

Version Date Tech Notes
1.0 2021-05-01 Raj Goel, CISSP Emeritus
raj@brainlink.com /
917-685-7731
Initial Version

Developed using brainlink's SOPCULTURE technology

Purpose: I assisted a client with getting their NUTANIX Cluster installed. Nutanix support was excellent and I knew this was a technology I wanted to play with. So I built my own HIGH-PERFORMANCE COMMODITY NUTANIX Cluster

NUTANIX Commodity Cluster Bill of materials

1 HDMI Extension cable https://www.amazon.com/gp/product/B08GPMQMPS
1 3-way HDMI Splitter https://www.amazon.com/gp/product/B06VX1PKQ7
1 Logitech Wireless keyboard & Mouse https://www.amazon.com/gp/product/B079JLY5M5
3 128GB Corsair RAM bundles https://www.amazon.com/gp/product/B085WQXKM2
3 Asus D700SC https://www.amazon.com/gp/product/B09TLG7FCF
3 10GB SFP NICs https://www.amazon.com/gp/product/B06X9T683K
3 SFP+ cables https://www.amazon.com/gp/product/B00U8BL09Q
1 MicroTIK 4-port 10GB Switch https://www.amazon.com/gp/product/B07LFKGP1L/
3 500GB Samsung 2.5 inch SSD https://www.amazon.com/gp/product/B08QBMD6P4
3 Sabrent 4TB NVME SSD https://www.amazon.com/gp/product/B08VF99PV8
Step Task Screenshot
1 Unpack each of the PCs Per-server parts
2 Remove Thumb screws & remove the side panel
3 Press the 4 plastic tabs to remove the front cover Press the metal tab to rotate the front assembly 90 degrees
4 Install 128GB Memory 10GB NIC 4TB NVME under the fan shroud 2.5” SATA SSD
5 Close the case
6 Connect the Servers via the 10GB SFP+ cables to the MicroTik switch Connect Microtik via ethernet to your network
7 Download the NUTANIX COMMUNITY EDITION ISO from https://www.nutanix.com/products/community-edition
8 Burn the ISO to a USB key using Rufus (on windows)
9 Boot EACH PC off the USB
10 MY IP CONFIGURATION: (Yours should match YOUR LAN IP schema!)

NODE1: 10.10.18.211 / Netmask: 255.255.25.0 / Gateway: 10.10.18.1
NODE2: 10.10.18.212 / Netmask: 255.255.25.0 / Gateway: 10.10.18.1
NODE3: 10.10.18.213 / Netmask: 255.255.25.0 / Gateway: 10.10.18.1

CVM1: 10.10.18.221 / Netmask: 255.255.25.0 / Gateway: 10.10.18.1
CVM2: 10.10.18.222 / Netmask: 255.255.25.0 / Gateway: 10.10.18.1
CVM3: 10.10.18.223 / Netmask: 255.255.25.0 / Gateway: 10.10.18.1
11 PING ALL NODES & CVM Servers
All 6 servers should be up before proceeding
#NODE 1
ping 10.10.18.211 
#NODE 2
ping 10.10.18.212 
#NODE 3
ping 10.10.18.213 

#CVM 1
ping 10.10.18.221 
#CVM 2
ping 10.10.18.222 
#CVM 3
ping 10.10.18.223
12 Ssh into the 1st Node e.g. ssh root@10.10.18.211
13 Check CVM Status  virsh list --all 

Id    Name                           State
----------------------------------------------------
1     NTNX-83cc7baf-A-CVM            running
14 SSH into the 1st CVM ssh nutanix@10.10.18.221
14 Confirm you can ping ALL NODES & CVMs #NODE 1
ping 10.10.18.211 
#NODE 2
ping 10.10.18.212 
#NODE 3
ping 10.10.18.213 

#CVM 1
ping 10.10.18.221 
#CVM 2
ping 10.10.18.222 
#CVM 3
ping 10.10.18.223
16 Create your cluster from ANY CVM cluster -s 10.10.18.221,10.10.18.222,10.10.18.223 create 
17 After cluster has been created, set NTP & DNS ## SSH into ANY CVM
ssh nutanix@10.10.18.221 

## Set DNS
ncli cluster get-name-servers
ncli cluster add-to-name-servers servers="10.10.18.1"
ncli cluster get-name-servers 

## Set NTP
ncli cluster get-ntp-servers
ncli cluster add-to-ntp-servers servers="pool.ntp.org"
ncli cluster get-ntp-servers
18 Login to PRISM https://10.10.18.223:9440/
19 Rename your cluster & set Cluster IP
20 Cluster dashboard
21 <SOP READY for team Review>